Dr. Tejinder Paul Singh

Dr. Tejinder Paul Singh

Designation:

Professor and Head

Specialization:

Manufacturing Processes

Email:

tpsingh@thapar.edu

Education and Training

  • Ph.D. Thapar Institute of Engineering and Technology, Patiala
  • M.E. in Industrial Engineering, Thapar Institute of Engineering and Technology, Patiala
  • B.E. in Mechanical Engineering Punjabi Univ. (Thapar Institute of Engineering and Technology, Patiala)

Experience:

January 8, 2018 till date

  • Professor, Mechanical Engineering Department, Thapar Institute of Engineering and Technology, Patiala

March 8, 2010 September 21, 2017

  • Dean, Faculty of Engineering, Symbiosis International University, Pune
  • Director, Symbiosis Institute of Technology, Pune 

August 2008-Feb 2010

  • Professor & Director, Rayat Bahra Institute, Punjab
  • Professor & Campus Director, Gulzar Group, Punjab

August 1988 to August 2008 (Thapar Institute of Engineering & Technology)

  • Professor (1996 to 2008), Assistant Professor (1991 to 1996) and Lecturer (1988 to 1991), Mechanical Engineering
  • Dean - Academic Affairs
  • Dean - Resource Planning and Generation
  • Head - Department of Mechanical & Industrial Engineering
  • Professor In charge Central Workshops
  • Centre Director - CII TDB TNET
  • Acting Director

June 1978 to August 1988 (Industry)

  • Purchase Engineer at Purolator India Ltd
  • Maintenance Engineer, Senior Production Engineer and Assistant Manager at Escorts AMD, Patiala

Teaching Interests:

  • Manufacturing Processes
  • Manufacturing Technology
  • Production and Operation Management
  • Quality Engineering and Management
  • Optimization

Research Interest:

  1. Non traditional Manufacturing
  2. Surface Engineering
  3. Industrial Engineering
  4. Lean Manufacturing

Scopus Index - 10

Scopus Citations - 555

Google Scholar H Index - 14

Google Scholar Citations - 1190

Google Scholar i10 Index - 31

Publications:

  • Dalavi, A. Pawar, P., Singh, T.P. : Sequence optimization of hole-making operations for injection mould using shuffled frog leaping algorithm with modification, Management and Production Engineering Review, 2018
  • Solke, N.S., Singh, T.P: Analysis of relationship between manufacturing flexibility and lean manufacturing using structural equation modelling, Global Journal of Flexible Systems Management, 19(2): 139-157, 2018
  • Solke, N.S., Singh, T.P: Application of total interpretive structural modelling for lean performance – a case study International Journal of Mechanical Engineering and Technology, vol.9, Issue 1, pp 1086-1095, 2018
  • Patil, O.M., Khedkar, N.N., Sachit, T.S., Singh, T.P: A review on effect of powder metallurgy process on mechanical and tribological properties of Hybrid nano composites Materials Today: Proceedings 5(2), pp 5802-5808, 2018
  • Kumar, S., Singh, R., Batish, A., Singh, T.P., Singh, R: Multi-optimisation of electric discharge machining parameters for cryogenically treated pure titanium using grey-Taguchi technique International Journal of Machining and Machinability of Materials, Vol. 20, Issue 3, 2018
  • Kumar, S., Singh, R., Batish, A., Singh, T.P: Multi-objective parametric optimization using the grey-taguchi approach for powder mixed electric discharge machining of grade-ii titanium alloy with cryogenically treated electrodesndian Journal of Engineering and Materials Sciences, Vol. 24, pp 339-350, 2017.
  • Kumar, S., Singh, R., Batish, A., Singh, T.P., Singh, R: Investigating surface properties of cryogenically treated titanium alloys in powder mixed electric discharge machining Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39(7), 2017
  • Kumar, S., Khedkar, N.K., Jagdap B., Singh, T.P: The effect of cryogenic treatment on cutting tools, IOP Conference series, Materials Science & Engineering 225 (1), 2017
  • Kumar, S., Singh, R., Batish, A., Singh, T.P., Singh, R. Machining performance of cryogenically treated Ti-5Al-2.5Sn titanium alloy in electric discharge machining: A comparative study Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol.31, Isuue 11, pp 2017-2024, 2017
  • Kumar, S., Singh, R., Batish, A., Singh, T.P., Singh, R. Modeling the tool wear rate in powder mixed electro-discharge machining of titanium alloys using dimensional analysis of cryogenically treated electrodes and workpieceProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, vol. 231, Issue 2, pp 271-284, 2017.
  • Auti, A.B., Pangavane, D.R., Singh, T.P., Sapre, M: Estimation of time of tracking for designed absorber used in domestic solar desalination system using experimental and Finite Element analysis (ANSYS) Materials Today: Proceedings, 4(2), 2516-2524, 2017

International Journals

  1. Sanjeev Kumar, Rupinder, Ajay Batish, T.P.Singh: Investigations on Effect of Electrode Polarity on Machining Performance of Ti-5AI-2.5Sn Alloy using Electric Discharge Machining Process, Advanced Materials Research, ISSN: 1662-8985, Vol .1137 pp 39-51 , 2016 Trans Tech Publications
  2. Dalvi AM, Pawar P.J., Singh T.P: Review on optimization of hole-making operations for injection mould using non-traditional algorithms, International Journal of Industrial Engineering and Management, 2016
  3. Dalvi AM, Pawar P.J., Singh T.P: Optimal Sequences of hole-making operations using particle swarm optimization and stuffled frog leaping algorithm, Engineering Review, Volume 36, Issue 2, April 2016, PP 187-196
  4. Kumar S., Singh R., Batish A., Singh T.P.: Study the effect of black layer on electrode wear ratio in powder mixed electric discharge machining of titanium alloys , International Journals of Machining and machinability of materials, Volume 18, Issue 1-2, 2016, PP 18-35
  5. Singh T.P., Jatti V.K.S.: Optimization of the deposition parameters of DLC coatings with the IC-PECVD method, particulate Science and Technology , 33(2) pp 119-123, 2015
  6. Jatti V.K. S., Singh T. P.: Optimization of material removal rate during electrical discharge machining of advanced materials using Taguchi method; Global Journal of Pure and Applied Mathematics, 2015, 11(2), pp 949-962
  7. Dalvi A.M, Pawar P.J., Singh T.P.: Optimization of hole making operations for injection mould using particle swalm optimization algorithm; International Journal of Industrial Engineering Computations,2015, 6(4), pp 433-434
  8. Kamble L.V. Panghwane D. R., Singh T.P.: Neural Network optimization by comparing the performances of the training functions – Prediction of heat transfer from horizontal tube immersed in gas –solid fluidized bed; International Journal of Heat and Mass Transfer; 83, pp 337-344
  9. Khedkar N.K., Singh T.P., Jatti V.K.S.: Surface modification of die steel materials machined by powder mixed electrical discharge machining ; A review; International Journal of Applied Engineering Research, 10(7) pp 38167-38176
  10. Jatti V.K.S., Singh T. P.: Modeling simulation and experimental validation of electrical discharge machining of Niti alloy; International Review of Modeling and Simulations, 8(2) pp 165-170
  11. Shekhar R., Singh T.P.: Mechanisms in turning of metal matrix composites: A review; Journal of Materials Research and Technology, 4(2), pp 197-207
  12. Pandure P.S., Jatti V.S, Singh T.P.: Three dimensional FE modeling and simulation of nano-indentation and scratch test for TIN coated high speed steel substrate; International Journal of Applied Engineering Research, 2014, 9(15), pp 2771-2777
  13. Pandure P.S., Jatti V.S., Singh T.P.: Three dimensional FE modeling of the scratch test of DLC coated high speed substrate; Applied Mechanics and Materials, 2014, 592-594, pp 1235-1239
  14. Chauhan G., Singh T.P.: Resource flexibility for lean manufacturing : SAP-LAP analysis of a case study; International Journals of Lean Six Sigma, 2014, 4(4), pp 370-388
  15. Jadhav S., Sekhar R., Singh T.P.: Process capability and stability analysis in track grinding of taper roller bearings; International Journal of Applied Engineering Research, 10(4), pp 11263-11271
  16. Agrawal D., Sekhar R., Singh, T.P.: Finite element analysis of mono composite leaf spring for automobile application; International Journal of Applied Engineering Research, 10(8) pp 20741-20754
  17. Vijra N., Singh T.P.: Developments in heat pipe: A comprehensive review ; International Journal of Applied Engineering Research, 2015, 10(10) pp 25243-25286
  18. Jatti V.S., Singh T.P.: Copper oxide nano-particles as anti-wear and friction-reduction additives in lubricating oil; Journal of Mechanical Science and Technology, 2015, 29(2) pp 793-798
  19. Auti A.B., Pangavane D.R., Singh T.P., Sapre M., Warke A.S.: Study on reflector material optimization of a parabolic solar concentrator; Lecture Notes in Electrical Engineering, 2015, 326 pp 275-284
  20. Kamble L.V., Panghwane D., Singh T.P.: Artificial neural network based prediction of heat transfer from horizontal tube bundles immersed in gas–solid fluidized bed of large particles; Journal of Heat Transfer, Volume 137, Issue 1, Jan 2015
  21. Vishwakarma P., Sekhar R., Singh T.P.: Finite element analysis of force variation with cutting speed in orthogonal turning of aluminum AA6351 alloy; International Journal of Applied Engineering Research, 2015, 10(4) pp 10055-10064
  22. Gaikwad Vaibhav, Jatti Vijaykumar, Singh T.P Electric discharge machining of cryo-treated NiTi alloy by cryo-treated and untreated copper electrode. Journal of Chemical and Pharmaceutical Research, 7(7) : 210-215 (Scopus; ISSN: 0975-7384). (08/2015)
  23. Vijaykumar S jatti, T P Singh Optimization of Tool Wear Rate during Electro Discharge Machining of NiTi Alloys using Taguchi Method. Applied Mechanics and Materials, 787: 260-265 (Scopus,Ebsco,Google Scholar,Index Copernicus,Inspec,Thomson Reuteurs; ISSN: 1662-7482). (06/2015)
  24. Rahul Jadhav, Vijaykumar S Jatti, T P Singh Magnetic field Assisted Electric Discharge Machining of Cryo-treated Monel 400 Alloy. Applied Mechanics and Materials, 787: 371-375 (Scopus,Ebsco,Google Scholar,Index Copernicus,Inspec,Thomson Reuteurs; ISSN: 1662-7482). (06/2015)
  25. Sandeep Chinke, Vijaykumar S Jatti, T P Singh Electrical Discharge Machining of Cryo-treated BeCu Alloys. Applied Mechanics and Materials, 787: 386-390 (Scopus,Ebsco,Google Scholar,Index Copernicus,Inspec,Thomson Reuteurs; ISSN: 1662-7482). (06/2015)
  26. Shivraj Bagane, Vijaykumar S Jatti, T P Singh Machinability study of Beryllium Copper by Powder Mixed Electric Discharge Machining. Applied Mechanics and Materials, 787: 376-380 (Scopus,Ebsco,Google Scholar,Index Copernicus,Inspec,Thomson Reuteurs; ISSN: 1662-7482). (06/2015)
  27. Vaibhav Gaikwad, Vijaykumar S jatti, T P Singh Electrical Discharge Machining of Cryo-treated NiTi Alloys. Applied Mechanics and Material, 787: 366-370 (Scopus; ISSN: 1662-7482). (06/2015)
  28. Chauhan G., Singh T.P.: Development and validation of resource flexibility measures for manufacturing industry; Journal of Industrial Engineering and Management, 2014, 7(1) pp 21-41
  29. Dhabale R., Jatti V.S., Singh T.P.: Optimization of surface roughness of ACMg1SrCu in turning operation using genetic algorithm; Applied Mechanics and Materials, 592-594, pp 647-651
  30. Sapre M.S., Auti A.B., Singh T.P.: Design and manufacturing of absorber for solar desalination of system; Applied Mechanics and Materials, 446-447, pp 716-720
  31. Raut S.V., Jatti V.S, Singh T.P.: Influence of built orientation on mechanical properties in fused deposition modeling; Applied Mechanics and Materials, 592-594, pp 400-404
  32. Kamble L. V, Singh T.P.: Heat transfer studies using artificial neural network: A review; International Journal of Energy, 2014, 14(1) pp 25-42
  33. Singh R.P., Batish A., Singh T.P., Bhattacharya A.: An experimental study to evaluate the effect of ambient temperature during manual lifting and design of optimal task parameters; Human Factors and Ergonomics in Manufacturing, 2014, 24(1), pp 54-70
  34. Walkar H., Singh T.P.: Magnetic field assisted electrical discharge machining of AISI4140; Applied Mechanism and Materials, 592-594, pp 479-483
  35. Singh R.P., Batish A., Singh T.P.: Determining safe limits for significant task parameters during manual lifting workplace; Health and Safety, 62(4), pp 150-160
  36. Khedkar N., Singh T.P., Jatti V.S.: Material migration and surface improvement of OHNS die steel material by EDM method using tungsten powder mixed dielectric WSEAS; Tran - Applied and Theoretical Mechanics, 9 pp 161-166
  37. Khedkar N.K., Singh T.P., Jatti V.S.: Surface improvement of H13 hot die steel material by EDM method using silicon carbide powder- mixed dielectric; International Journal of Applied Engineering Research, 2014, 9(18), pp 4809-4816
  38. Jatti V.S., Laad M., Singh T.P.,: Raman Spectroscopy studies on DLC films synthesized by PECVD method; Applied Mechanics and Materials, 592-594, 842-846
  39. Raut S.V., Jatti V.K.S, Singh T.P.: Mechanical properties of copper filled acrylonitrile butadiene styrene composites; International Journal of Applied Energy Resource, 9(16) 3409-3416
  40. Kamble L.V., Panghwane D., Singh T.P.: Experimental investigation of horizontal tube immersed in gas-solid fluidized bed of large particles using artificial neural network; International Journal of Heat and Mass Transfer, 2014, 70, pp 719-724
  41. Kumar S., Singh R., Batish A., Singh T.P.: A hybrid Taguchi–artificial neural network approach to predict surface roughness during electric discharge machining of titanium alloys; Journal of Machining Science and Technology, 2014, 28(7), pp2831-2844
  42. Walkar H., Jatti, V.S., Singh, T.P.: Multi-objective optimization of magnetic-field-assisted EDM process during machining of ALSI 4140 using non-dominated sorted genetic algorithm; International Journal of Applied Engineering Research, 2014, 9(14), pp 2745-2752
  43. Jatti V.S., Singh T.P.: Effect of deep cryogenic treatment on machinability of NiTi shape memory alloys in electro discharge machining, Applied Mechanics and Materials, 2014, 592-594, pp 197-201
  44. Dalvi M., Kole S., Kulkarni S., Dalvi A., Singh T.P.: Investigation of different liner materials for two piece liner propeller shaft using finite element approach; International Journal of Applied Engineering Research, 2014, 8(17), pp 1989-1994
  45. Jatti Vijay kumar, Laad Meena, Singh T.P. Taguchi Approach for Diamond-like Carbon Film Processing. Procedia Materials Science, 6: 1017-1023 (ScienceDirect; ISSN: 2211-8128) (09/2014)
  46. Dhabale Rahul, Jatti Vijay kumar, Singh T.P. Multi-objective Optimization of Turning Process During Machining of AlMg1SiCu Using Non-dominated Sorted Genetic Algorithm. Procedia Materials Science, 6: 961-966 (ScienceDirect; ISSN: 2211-8128) (09/2014)
  47. Pandure Pravin, Jatti Vijay kumar, Singh T.P. Finite Element Simulation of Nano-indentation of DLC Coated HSS Substrate. Procedia Materials Science, 6: 1619-1624 (ScienceDirect; ISSN: 2211-8128) (09/2014)
  48. Raut Sandeep, Jatti Vijay kumar, Khedkar Nitin, Singh T.P. Investigation of the Effect of Built Orientation on Mechanical Properties and Total Cost of FDM Parts. Procedia Materials Science, 6: 1625-1630 (ScienceDirect; ISSN: 2211-8128) (09/2014)
  49. Vijra Nishtha, Chaudhari Akhil, Singh T.P. (08/2014) Experimental Study of Thermal Performance of Conventional Heat Pipe. American International Journal of Research in Science, Technology, Engineering & Mathemat ics, 7(3) : 183-188 (Ebsco,ProQuest,WorldCat,Google Scholar, Scirus, BASE,Cite Seerx,DOAJ,GetCITED,Index Copernicus,Inspec,Open J-Gate,ResearchGa; ISSN: 2328-3580).
  50. Chaudhari N. E., Vijra N., Singh T.P.: Computational fluid dynamics analysis of two phase thermosyphon; International Journal of Engineering and Technology, 2013, 5 No 5, pp 3794-3800
  51. Dhabale R., Jatti V.S., Singh T.P.: Optimization of turning process during machining of AlMg1SiCu using Taguchi method and ANOVA, International Journal of Applied Engineering Research, 2013, 8(11), pp 1273-1281
  52. Auti A.B., Singh T.P., Sapre M.S.: Theoretical, experimental and finite element analysis of heat loss for designing a parabolic concentrator; International Review of Mechanical Engineering, 2013, 7(5), pp 864-868
  53. Patil S, Auti A., Singh T. P.: CFD analysis of condensor for solar desalination system; International Review of Mechanical Engineering, 2013, 7(6), pp 1159-1163
  54. Auti A., Singh T.P., Panghwane D., Chavan A.: Solar water desalination system with condenser without using electricity for rural areas; American Journal of Applied Science, 2013, 10(9), pp 1109-1114
  55. Rathod S, Shekhar R, Jatti V.K.S., Singh T.P.: Optimization of tool shape and size in EDM Al alloy metal matrix composites; International Journal of Applied Engineering Research,2013, 8(5), pp 639-646
  56. Singla N., Khanduja D., Singh T.P.: A TQM implementation model for enhancing competitiveness of Indian manufacturing firms; International Journal of Performability Engineering, 2013, 9(4), pp 387-396
  57. Auti A., Singh T.P., Panghwane D.R.: Thermal analysis of parabolic concentrator for finding optical efficiency by different methods with varying parameters; International Journal of Engineering & Technology, 2013, 5(2), pp 1484-1488
  58. Phutane P., Jatti V.K.S., Shekhar R., Singh T.P.: Synthesis and characterization of SiC reinforced HE-30 al alloy particulate MMCs; International Journal of Engineering & Technology, 2013, 5(3), pp 2866-2870
  59. Singh T.P., Chauhan G.: Significant parameters of labour flexibility contributing to lean manufacturing; Global Journal of Flexible Systems Management, 2013, 14, (2) pp 93-105
  60. Chauhan G., Singh T. P.: Measuring parameters of lean manufacturing realization; Measuring Business Excellence, 2012, 16(3), pp 57-71
  61. Kumar S., Singh R., Batish A., Singh T.P.: Electric discharge machining of titanium and its alloys: A Review; International Journal of Machining and Machinability, 2012, 11, (1), pp 84-111
  62. Singh R. P., Batish A., Singh T.P.: Analyzing signal to noise ratio optimization of physiological stress of Indian male workers in summer & winter season during manual lifting tasks; Contemporary Ergonomics and Human Factors, 2011-------
  63. Chauhan G., Singh T.P.: Lean manufacturing through management of labour and machine flexibility: A comprehensive review; Global Journal of Flexible Systems Management, 2011, 12(1&2), pp 69-80
  64. Chauhan G., Singh T.P., Sharma S.K.: Change processes towards flexible lean manufacturing: A framework; International Journal of Performability Engineering, 2010, 6, (4), pp 368-372
  65. Kumar S, Singh T.P., Sethi B.L.: Surface alloying of OHNS die steel by EDM process using Inconel electrode; International Journal of Machining and Machinability of Materials, 2009, 6(3-4), pp 176-193
  66. Kumar S., Singh T.P., Sethi B.L.: Comparison of material transfer in electrical discharge machining of H13 die steel: Proceedings of IME, part C, Journal of Mechanical Engineering. Science, 2009, 223, pp 1733-1740
  67. Nanda Tarun, Singh, T.P.: An assessment of the technology innovation initiatives in the Indian small scale manufacturing industry; International Journal of Technology Policy and Management, 2009, 9 (2), pp 173-207
  68. Kumar S., Singh T.P., Singh R., Sethi B.L: Surface modification by electric discharge machining: A review; Journal of Material Processing Technology, 2009, 209, (8), pp 3675-3687
  69. Singh D., Nanda T., Singh T. P.: Strategic alignment of technological innovation initiatives in cutting tool industry in the region; International Journal of Technology Policy and Management, 2009, 9 (4), pp 358-386
  70. Nanda T., Singh T.P.: Determinants of creativity at workplace-A comprehensive review; International Journal of Technology Policy and Management, 2009, 9, (1), pp 84-106
  71. Batish Ajay, Singh T.P.: MHAC- An assessment tool for analyzing manual material handling tasks, International Journal of Occupational Safety and Ergonomics, 2008, 14,(2), pp 223-235
  72. Thakkar S.K., Singh T.P.: A comparative study of the performance of different EDM electrode materials in two dielectric media; Journal of the Institution of Engineers (India), 2007, 87, PR/2, pp 3-8
  73. Garg R.K., Singh T.P.: Management of change: A comprehensive review; Global Journal of Flexible Systems Management, 2006, 7(1&2), pp 45-60
  74. Chauhan G., Singh T.P.: Resource flexibility for lean manufacturing: SAP-LAP analysis of a case study; International Journal of Lean Six Sigma, 2013, 4( 4), pp 370-388
  75. Dongrekar J., Singh T.P.: Development of a Computer based MRP system on simulated production data of a manufacturing unit; International Journal of Industrial Engineering and Technology, 2013, 1(4), pp 65-72
  76. Rathod R., Jatti V. K. S., Sekhar R., Singh T.P.: Effect of tool diameter in EDM of EN19 using OVAT approach; 109(1), pp 175-182
  77. Sapre M.S., Auti A., Singh T.P.: Design and manufacturing of absorber for solar desalination system; Advanced Material Research, 2013, 446 - 447, pp 716-720
  78. Sangha B.S., Singh T.P., Batish A.: Industry support institution fostering technological innovations among SME's of Punjab: A strategic perspective; The Asian Journal of Technology Management, 2013, 6(1), pp 37-48
  79. Singla N., Singh T. P., Khanduja D.: Flexible system methodology: A driving tool for TQM in Indian industry; International Journal of Advances in Science and Technology, 2011
  80. Chauhan G., Singh T.P., Sharma S.K.: Measuring the status of lean manufacturing using AHP; International Journal on Emerging Technology, 2010, 1(2), pp 115-120
  81. Chauhan G., Singh T.P., Sharma S.K.: Productivity improvement through lean manufacturing: A case study; Journal of Science & Technology, 2010, 3, (1), pp 65-70
  82. Chauhan G., Singh T.P., Sharma S.K.: Role of machine flexibility in lean manufacturing; International Journal of Applied Engineering Research, 2009, 4(1), pp 25-33
  83. Chauhan G., Singh T.P., Sharma S.K.: Cost reduction through lean manufacturing, A case study; International Journal of Industrial Engineering Practice, 2008, 1(1)
  84. Garg R.K., Singh T.P.: Status of socio-technical change in Indian automobile industry- A longitudinal study; Global Journal of Flexible Systems Management, 2005, 6(3&4), pp 25-32
  85. Garg R.K., Singh T.P.: Managing change for competitiveness; Global Journal of Flexible Systems Management, 2002, 3(4), pp 13-22
  86. Gupta A.B., Singh T.P., Sushil: Manufacturing flexibility in a filter manufacturing enterprise- A case study; Global Journal of Flexible Systems Management, 2002, 3(1), pp 25-32
  87. Gupta A.B., Singh T.P., Sushil: Flexibility in an automobile manufacturing enterprise; Global Journal of Flexible Systems Management, 2001, 2(1), pp 43-50
  88. 88. Khamba J.S., Singh T.P., Sushil: Flexible Management of new technology; Global Journal of Flexible Systems Management, 2001, 2(4), pp 41-53

National Journals

  1. Chauhan G., Singh, T.P., Sharma, S.K.: Role of human flexibility in lean process management; National Journal of Technology, 2010, 6(4), pp 65-73
  2. Singh T.P.: Role of manpower flexibility in lean manufacturing; Flexible Enterprise, (Book Chapter based on selected papers from GLOGIFT 2008)
  3. Nanda T., Singh T.P.; A statistical analysis to evaluate the factors impairing performance of the tool and auto component industry; Manufacturing Technology Today, 2008, 7(10), pp 31-35
  4. Nanda T., Singh T.P.: A comprehensive strategy for technology generation through effective industry-institute bonding; The Indian Journal of Technical Education, 2008, 31(2), pp 1-6
  5. Thakkar S.K., Singh T.P.: Improving the surface properties of OHNS die steel using EDM process; Journal of Manufacturing Technology Today, 2006, 5(6), pp 7-11
  6. Batish, A., Singh, T.P.: Analysis of manual lifting tasks in an engine bearing manufacturing facility; ISTE Journal, 2005, 29(2), pp 43-50
  7. Batish, A., Singh, T.P.: Work posture assessment of an engine bearing manufacturing line for productivity improvement; Productivity, 2005, 46, pp 573-582
  8. Batish A., Singh T.P.: Improvement in worker productivity through interventions in repetitive production tasks; Productivity, 2004, 45(1), pp 69-74
  9. Singh I.P., Singh T.P.: Total productive maintenance implementation at Tata Steels; Productivity, 2004, 45(3), pp 422-428
  10. Singh I.P., Singh T.P.: Strategies for effecting quality improvement in technical education; The Indian Journal of Technical Education, 2004, 27(1)
  11. Singh T.P., Singh I.P.: Administration of technical education institutions on the pattern of manufacturing industry for quality assurance; The Indian Journal of Technical Education, 2004, 27(2)
  12. Kumar A., Singh T.P.: Energy waste in an engineering industry; Productivity, 2003, 44(2)
  13. Singh J., Singh T.P.: Reduction of material waste in a manufacturing industry; Productivity, 2002, 43(3), pp 43-51
  14. Singh S., Singh T.P., Bali P.L.: Aggregate manpower planning for a seasonal industry; Industrial Engineering, 1997, 26(1)
  15. Sharma K.R., Bali P.L., Singh T.P.: Simulation based maintenance planning for a machine shop; Maintenance, 1992, 2(4), pp 6-12
  16. Singh T.P., Bali P.L.: Energy analysis of a non-ferrous piston foundry: A case study; Energy Management, 1991, 16(2), pp 37-45
  17. Singh T.P., Bali P.L.: setting time standards in engineering industries: A practical viewpoint; Industrial Engineering, 1991, 20(8)
  18. Singh T.P., Bali P.L.: Energy conscious selection of industrial machinery and equipment; Industrial Engineering, 1990, 14(2), pp 17-21
  19. Singh T.P.: Role of Manpower Flexibility in Lean Manufacturing; The Flexible Enterprise, Flexible Systems Management, Chapter 18, DOI 10-1007/978-81-322-1560-8-18, Sushil & Stohr E., Springer India, 2014
  20. Singh R. P., Batish A., Singh T. P.: Analyzing S/N ratio optimization of physiological stress of Indian male workers in summer and winter during manual lifting tasks; Contemporary Ergonomics and Human Factors (Book Chapter) 2011, pp 270-277

International Conferences

  1. Singh T.P.: Role of industrial engineering in lean manufacturing; 3rd International Conference on Production & Industrial Engineering (CPIE-2013), BR Ambedkar National Institute of Technology, Jalandhar, March 29-31, 2013
  2. Singh T.P., Jatti V.K.S.: Optimization of the deposition parameters of DLC coatings with the IC-PECVD method; International Conference on Powder, Granule and Bulk Solids: Innovations and Applications (PGBSIA 2013), Thapar University, Patiala, India, November 28-30, 2013
  3. Jatti V.K.S., Singh T.P.: Particle deposition of diamond-like-carbon on silicon wafers using inductively coupled PECVD; International Conference on Powder, Granule and Bulk Solids: Innovations and Applications (PGBSIA 2013), Thapar University, Patiala, India, November 28-30, 2013
  4. Singh T.P., Vijra N.: Modeling of energy usage using physical system theory model; Recent Advances and Challenges in Energy, Manipal Institute of Technology, Manipal, January 4-6, 2012
  5. Vijra N., Singh T.P.: Enhanced air finned cooler to improve the sustainability and life of mechanical seals; Recent Advances and Challenges in Energy, Manipal Institute of Technology, Manipal, January 4-6, 2012
  6. Sangha B. S., Singh T. P., Batish A.: An assessment of regional innovation system among small scale auto path industry of Punjab, 7th Annual International Conference of Technology Intensity & Global Competitiveness, Symbiosis International University, Pune, November 30- December 2, 2012
  7. Singh R.P., Batish A., Singh T.P.: Analyzing signal to noise ratio optimization of physiological stress of Indian male workers in summer & winter season during manual lifting tasks; Ergonomics & Human Factors 2011, Institute of Ergonomics & Human Factors, Stoke Rochford, Lincolnshire, UK, April 12- 14, 2011
  8. Singh T.P., Chauhan G.: Management of labour flexibility for lean manufacturing; 11th Global Conference on Flexible Systems Management, Indian Institute of Management, Kozhikode, December 9-12, 2011
  9. Kumar S., Batish A., Singh R., Singh T.P.: Research developments in powder mixed dielectric electric discharge machining (PMEDM): A review; 2nd International Conference on Production and Industrial Engineering (CPIE 2010), 2010, pp 702-713
  10. Singh R., Kumar S., Batish A., Singh T.P.: Electric discharge machining of Titaniunm and its alloys, International Journal of Machining and Machinability of Materials, 2010
  11. Chauhan G., Singh, T.P., Sharma S.K.: A survey of labour and machine flexibility in indian manufacturing industry; International Conference on Recent Trends in Management, Technology & Environment, pp 359-364, November 28-29, SDCET, Muzaffarnagar, UP
  12. Chauhan G., Singh, T.P., Sharma S.K.: Strategic implications of flexibility in manufacturing systems; International Conference on Emerging Technologies and Applications in Engineering, Technology and Sciences, Saurashtra University, Rajkot, Gujarat (India), January 13-14, 2008, pp 2484-2489
  13. Sangha B.S., Singh T.P., Batish A.: Development of a model for fostering innovation culture in small scale auto parts industry of Punjab, GLOGIFT, Stevens Institute of Technology, Hoboken, NJ, June 14-16, 2008, pp 169-177
  14. Singh T.P.: Role of manpower flexibility in lean manufacturing; GLOGIFT, Stevens Institute of Technology, Hoboken, NJ, June 14-16, 2008, pp 169-177
  15. Singla N., Singh T.P.: Flexible system methodology approach for TQM implementation in industry, GLOGIFT, Stevens Institute of Technology, Hoboken, NJ, June 14-16, 2008, pp 169-177
  16. Chauhan G., Sharma S.K., Singh T.P.: Measurement of routing flexibility in a manufacturing system: A fuzzy logic model; Global Conference on Production and Industrial Engineering, NIT, Jalandhar, March 22-24, 2007, pp 1-6
  17. Chauhan G., Singh T.P., Sharma S.K.: The operational strategic implications of flexibility in manufacturing systems; International Conference on Advanced Manufacturing Technologies (ICAMT-2007), Central Mechanical Engineering Research Institute, Durgapur, Gujarat, India, November 29-30, 2007, pp 594-603
  18. Garg R.K., Singh T.P.: Making change in Indian automobile Industry for success; 6th Global Conference on Flexible Systems Management, Asian Institute of Technology Bangkok, Thailand, December 20-22, 2006
  19. Garg R.K., Singh T.P.: Managing change: A case of an Indian engineering industry; 6th Global Conference on Flexible Systems Management, Asian Institute of Technology Bangkok, Thailand, December 20-22, 2006
  20. Thakkar S.K., Singh T.P.: Experimental investigations into the phenomenon of material transfer during electrical discharge machining process; International Conference on Advances in Materials Processing and Characterization,(AMPC 2006), Anna University, Chennai
  21. Garg R.K., Singh T.P.: Managing socio-technical change in Indian component manufacturing industry: A case study; 14th ISME International Conference on Mechanical Engineering in Knowledge Age, Delhi College of Engineering, Delhi, December 12-14, 2005
  22. Garg R.K., Singh T.P.: Managing socio-technical change in Indian tractor-manufacturing industry: A case study; 5th Global Conference on Flexible Systems Management at RGPV, Bhopal, December 27-30, 2005
  23. Garg R.K., Singh T.P.: Managing socio-technical change in Indian passenger vehicle manufacturing industry-A case study; 11th International Conference on Productivity and Quality Research, IIT Delhi, December 12-15, 2005
  24. Nanda T., Singh T.P., Sabharwal R.: Low performance of Indian manufacturing organizations in the area of technology development: Defects and remedies, 5th Global Conference on Flexible System Management (GLOGIFT 2005), Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal, December 27-29, 2005
  25. Singh T.P., Aggarwal P.: TQM through ISO 9000:2000: A case study of a clinical laboratory; 11th International Conference on Productivity and Quality Research, IIT Delhi, December 12-15, 2005
  26. Kumar A., Singh T.P.: Quality circles: Changing images of people at work, integrating productivity and quality improvement; 3rd International Conference on Advanced Manufacturing Technology (ICAMT 2004), International Islamic University, Malaysia
  27. Batish A., Singh T.P.: Ergonomic assessment of an engine bearing manufacturing workplace for productivity improvement, 34th International Conference on Computers and Industrial Engineering , San Francisco, CA, November 14-16, 2004
  28. Garg R.K., Singh T.P.: Managing Socio-technical change in Indian automobile industry (Components Manufacturers): A case study; 4th Global Conference on Flexible Systems Management, ITM, Moussorie, Uttranchal, December 26-29, 200,
  29. Garg R., Singh T.P.: Role of change agents in organizational change, 4th Global Conference on Flexible Systems Management, ITM, Moussorie, Uttranchal, December 26-29, 2004
  30. Singh T.P., Singh I.P.: An integrated SQC-PERT approach for reduction of manufacturing time of large assembly products; 34th International Conference on Computers and Industrial Engineering, at Sheraton Fisherman Wharf, San Francisco, CA, November 14-16, 2004
  31. Singh I.P., Singh T.P.: Total productive implementation in Indian manufacturing industry for sustained competitiveness; 34th International Conference on Computers and Industrial Engineering, San Francisco, CA, November 14-16, 2004
  32. Batish A., Singh T.P.: An approach for ergonomic analysis and design of manufacturing units for productivity; 32nd International Conference on Computers and Industrial Engineering, University of Limerick, Ireland, August 11-13, 2003, pp 182-187
  33. Garg R., Singh T.P: Managing change through flexible systems management : A case study; 3rd Global Conference on Flexible Systems Management, Jamia Milia Islamia, New Delhi, March 13-15, 2003
  34. Garg R.K, Singh T.P.: Managing organizational change for competitiveness; 2nd Global Conference on Flexible Systems Management (GLUGIFT 2002), Gwalior, March 24-27, 2002, pp 422-432
  35. Gupta A.B., Singh T.P.: Impact of volume flexibility in improving productivity; International Conference on Intelligent Flexible Autonomous Manufacturing Systems (IFAMS-2000), Coimbatore, January 10-12, 2000
  36. Gupta A.B., Singh T.P.: Management of flexibility for higher productivity; 1st Global Conference on Flexible Systems Management (GLUGIFT 2000), New Delhi, India, December 17-20, 2000, pp 793-800
  37. Gupta A.B., Singh T.P.: Flexibility management: A case study; 1st Global Conference on Flexible Systems Management (GLOGIFT 2000), New Delhi, India, December 17-20, 2000
  38. Khamba J.S., Singh T.P.: Correlation between flexibility and technology management; 1st Global Conference on Flexible Systems Management (GLUGIFT'2000), New Delhi, India, December 17-20, 2000, pp 373-380
  39. Sethi A.S., Khamba J.S., Singh T.P.: Implementation of world class manufacturing in an engineering organization; 1st Global Conference on Flexible Systems Management (GLOGIFT 2000), New Delhi, India, December 17-20, 2000, pp 801-810
  40. Sethi A.S., Khamba J.S., Singh T.P.: Total quality development; 1st Global Conference on Flexible Systems Management (GLUGIFT 2000), New Delhi, India, December 17-20, 2000 pp 869-886
  41. Lotey H.S., Khamba J.S., Singh T.P.: Implementation of supply chain management; 1st Global Conference on Flexible Systems Management (GLUGIFT 2000), New Delhi, India, December 17-20, 2000, pp 631-640
  42. Ahuja I.P.S., Khamba J.S., Singh T.P.: Technology adoption and adaptation: Key issues; 1st Global Conference on Flexible Systems Management (GLUGIFT 2000), New Delhi, India, Dec. 17-20, 2000, pp 425-431
  43. Khamba J.S., Singh T.P.: Technology up-gradation for cost effective competitiveness; 12th International Congress and Exhibition on Research and Development: R&D Vision 21st Century, Department of Scientific and Industrial Research, Ministry of Science and Technology, Govt. of India, January 15-16, 1999, pp 121-126
  44. Khamba J.S., Singh T.P.: Structural imperative of managing new technology; 15th ISPE/IEE International Conference on CAD/CAM, Robotics and Factories of the Future, Aguas De Lindoia, SP, Brazil, August 18-20, 1999 , pp MF 6-13 to MF 6-18
  45. Khamba J.S., Ahuja I.P.S., Singh T.P.: Implementation of total productive maintenance (TPM) in engineering organization; International Conference on Production and Operations Management (POMS 1999), IIT Delhi, India, December 21-24, 1999
  46. Singh T.P.: Qualitative modeling for reduction of manpower waste; 15th ISPE International Conference on CAD/CAM, Robotics and Factories of the Future, Aguas De Lindoia, SP, Brazil, August 18-20, 1999, pp MF4-11 to MF4-18
  47. Singh T.P.: Need and viability of training-cum-production centres in technical education institutes; 11th ISME Conference on Mechanical Engineering: Trends in Mechanical Engineering Education and Research, IIT, Delhi, February 3 to 5, 1999
  48. Gupta A.B., Singh T.P.: Status of manufacturing flexibility in Indian engineering industry; 14th International Conference on CAD/CAM, Robotics and Factories of the Future, (CAR & FOF 1998), PSG College of Technology, Coimbatore, December 1-3, 1998, pp 270-277
  49. Khamba J.S., Singh T.P.: Management of technology utilization in an engineering organization; 14th International Conference on CAD/CAM, Robotics and Factories of the Future, (CAR & FOF 1998), PSG College of Technology, Coimbatore, November 30- December 3, 1998, pp 733-740
  50. Khamba J.S., Singh T.P.: Application of system dynamics methodology to technology management; International Conference on System Dynamics (ICSD 1998), IIT, Kharagpur, December 15-18, 1998
  51. Gupta A.B., Singh T.P.: A framework for managing flexibility for productivity in engineering industry; International Conference on Advances in Mechanical & Industrial Engineering, Department of Mechanical and Industrial Engineering, University of Roorkee, Roorkee, February 6-8, 1997
  52. Gupta A.B., Singh T.P.: Process flexibility and productivity in engineering industry: A case study; International Conference on Management of Technology (ICMOT 1997), Department of Management Studies, IIT, Delhi, December 21-24, 1997
  53. Khamba J.S., Singh T.P.: Application of flexible systems methodology to technology management; International Conference on Management of Technology (ICMOT 1997), Department of Management Studies, IIT, Delhi, December 21-24, 1997
  54. Singh T.P.: Productivity measurement and analysis: A composite PST-AHP approach; International Conference on Advances in Mechanical & Industrial Engineering, Department of Mechanical & Industrial Engineering, University of Roorkee, Roorkee, Feburary 6-8, 1997
  55. Singh T.P.: Management of system's waste using flexible system methodology; International Conference on Management of Technology (ICNOT 1997): Globalization, Flexibility and Competitiveness, December 21-24, 1997
  56. Khamba J.S., Singh T.P.: A framework for flexible management of technology; International Conference on Technology Management/University/Industry/Govt. Collaboration, Istanbul, Turkey, June 24-26, 1996

National Conferences

  1. Singh T. P.: Job Designs for lean manufacturing; National Conference on Innovation for Competitive Edge: Growth & Stability, Symbiosis Centre for Management Studies, NOIDA, October 16-17, 2012
  2. Chauhan G., Singh T.P., Sharma, S.K., Singhal S: Computing the dimensions of lean manufacturing in manufacturing sector using AHP; 2nd National Conference on Precision Manufacturing, SLIET, Longowal , March 26-27, 2010
  3. Singh T.P., Batish Ajay, Sharma S.K.: Proposed method to modify the lifting equation; 3rd National Conference on Recent Advancements in Mechanical Engineering, November 14-15, 2008, pp 154-166
  4. Chauhan G., Singh T.P., Sharma, S.K.: Flexibility in manufacturing systems: A study; All India Conference on Recent Developments in Manufacturing & Quality Management, PEC Chandigarh , October 5 – 6, 2007, pp 16-21
  5. Chauhan G., Singh T.P., Sharma, S.K.: Productivity improvement survey of plywood and block board industry by energy conservation; All India Conference on Recent Developments in Manufacturing & Quality Management, PEC Chandigarh, October 5 – 6, 2007, pp 312-317
  6. Chauhan G., Sharma S.K., Singh T.P.: Productivity improvement survey of plywood and board manufacturing industry, National Conference on Trends in Mechanical Engineering, CIET Rajpura, January 19, 2007, pp 111-116
  7. Chauhan G., Sharma S.K. and Singh T.P.: Sustainability of plywood & block board industry in India; National Conference on Trends and Advances in Mechanical Engineering, YMCA Faridabad, December 9-10, 2006, pp 521-526
  8. Garg R., Singh T.P.: Initiating change with technology in automotive manufacturing organizations; Emerging Trends in Technology Management,( EMTECHMAN), GLAITM, Mathura, February 18-19, 2006, pp 250-257
  9. Thakkar S., Singh T.P.: Effect of chromium addition on the performance of copper electrode in EDM; All India Conference on Recent Developments in Manufacturing and Quality Management, PEC, Chandigarh, October 5-6, 2007
  10. Batish Ajay, Singh T.P.: Application of lean manufacturing principles on an manufacturing shop: A case study; 2nd National Conference on Recent Advancements in Mechanical Engineering, November 10-11, 2006, pp 144-150
  11. Garg R., Singh T.P.: Managing socio-technical change in Indian research in small scale units: A survey; 2nd National Conference on Recent Developments in Mechanical Engineering, TIET, Patiala, November 10-11, 2006
  12. Sabharwal R., Nanda T., Singh T.P.: Building technological capability in the context of globalization: challenges before the Indian manufacturing industry; Emerging Trends in Technology Management (EMTECHMA), GLAITM, Mathura, February 18-19, 2006, pp 235-249
  13. Nanda T., Singh T.P: Technology development through indigenous research in small scale units; a survey, 2nd National Conference on Recent Developments in Mechanical Engineering, TIET, Patiala, November 10-11, 2006
  14. Garg R., Singh T.P.: Managing change in Indian automobile component manufacturing industry; National Conference on Advances in Manufacturing Technology, NITTTR Chandigarh, November 9-11, 2005
  15. Garg R., Singh T.P.: Getting organizational success through change management: A case study; International Workshop on Real Life Case Studies in Business Management-2005, PCTE, Ludhiana, Punjab (On-line Workshop, 2005)
  16. Kumar A., Singh T.P.: Key ingredients for successful six sigma approach; National Seminar on Emerging Trends in Manufacturing Systems, SLIET, Longowal, January, 18-19, 2004
  17. Kumar A., Singh T.P.: Controlling manufacturing system and information through CAPP; National Conference on Advanced Manufacturing and Robotics, Central Mechanical Institute, Durgapur, January 10-11, 2004
  18. Singh T.P.: Challenges in manufacturing and evolving techniques; National Seminar on Emerging Trends in Manufacturing Systems, SLIET, Longowal, January 18-19, 2004
  19. Singh T.P., Kumar A.: Identification and reduction of energy waste in lighting systems: A Case Study, National Conference on Recent Developments in Mechanical Engineering, TIET, Patiala, October 31-November 1, 2003, pp 380-384
  20. Singh T.P., Batish A.; ISO 9000 Implementation for quality improvement in technical education, 2nd TIET Foresight Symposium on Higher Technical Education: Issues of Access and Delivery, TIET, Patiala , November 22-24, 2003
  21. Garg R., Singh T.P.: Achieving organizational success through change management: A case study; National Conference on Recent Developments in Mechanical Engineering, TIET, Patiala, October 31-November 1, 2003, pp 339-347
  22. Kumar J., Ahuja I.P.S., Singh T.P.: Competitive manufacturing through total productive maintenance; National Conference on Recent Developments in Mechanical Engineering, TIET, Patiala , October 31-November 1, 2003, pp 354-359
  23. Singh T.P., Ahuja I.P.S., Bawa H.S.: Resource mobilization for technical institutions; 2nd TIET Foresight Symposium on Higher Technical Education: Issues of Access and Delivery, TIET, Patiala, November 22-24, 2003
  24. Singh T.P.: Thematic address on issues of access and delivery; 2nd TIET Foresight Symposium on Higher Technical Education: Issues of Access and Delivery, TIET, Patiala, November 22-24, 2003
  25. Ahuja I.P.S., Kumar J., Singh T.P.: Total productive maintenance implementation for achieving business excellence in an Indian manufacturing industry; All India Conference on Maintenance and Reliability, Indian Institute of Production Management, Kansbahal, Orissa, November28-29, 2003, pp 186 -197
  26. Nanda T., Singh T.P., Ahuja I.P.S.: Technology development for core competence building in Indian manufacturing industry: Status and available options; National Conference on Recent Developments in Mechanical Engineering, TIET, Patiala, October 31-November 1, 2003, pp 368-371
  27. Singh T.P.: Role of industrial engineering in contemporary manufacturing; National Conference on Recent Developments in Mechanical Engineering, TIET, Patiala, October 31-November 1, 2003, pp 30-34
  28. Vaz A., Singla A, Singh S., Singh T.P.: Development of single axis manipulator for robotic manipulation; National Conference on Recent Developments in Mechanical Engineering, TIET, Patiala , October 31-November1, 2003, pp 424-431
  29. Vaz A., Singla A., Singh S., Singh T.P.: Velocity feedback for contact interaction control; National Conference on Recent Developments in Mechanical Engineering, TIET, Patiala, October 31-November 1, 2003,, pp 472-475
  30. Grover E., Singh T.P.: Modeling and control of single axis unconstrained manipulation using the impedance control approach: A trajectory control perspective; Emerging Trends in Mechatronics for Automation, 18th National Convention of Mechanical Engineers, Rourkela, November 9-10, 2002, pp 259-265
  31. Gupta A.B., Singh T.P.: Product flexibility for increased productivity in engineering industry: A case study; National Conference on Intelligent Manufacturing Systems: A Technology Watch, CIT, Coimbatore, February 6-7 ,1998, pp C4.1-C4.7
  32. Singh T.P.: A model for management of systems waste in engineering industry; 1st Annual Conference on Management and Infotech.: Energy Issues and Challenges, TIET, Patiala, October 11-12, 1996
  33. Gupta A.B., Singh T.P.: Role of flexibility in emerging areas 1st Annual Conference on Management and Infotech: Emerging Issues and Challenges, TIET, Patiala, October 11-12, 1996
  34. Singh T.P.: Development in metrology and inspection techniques; Symposium on Recent developments in Manufacturing, TCRDC, Patiala, February 1990

Sponsored Research Projects

  • Safety Work at Development, Construction and Operation Stages of Pune-Sholapur Highway, NHAI, 2013-15, 52.00 Lakhs, PI
  • Experimentation for Improvement in Surface Properties of Die and Tool Steels By EDM Process, DST, 2007-10, 23.05 Lakhs, PI
  • Funding for Infrastructure in Science and Technology (FIST), DST, 2004-09, 23.00 Lakhs, PI
  • SAP, Special Assistance Program, UGC, 2004-09, 23.00 Lakhs, PI
  • Setting up of a Cell for Research & Consultancy in the Area of Resource Waste Identification & Reduction, under TAPTEK, AICTE, 2000-03, 6.90 Lakhs, PI
  • Modernization and Removal of Obsolescence in the S.M. Lab under MODROBS, AICTE, 1999-2001, 7.00 Lakhs, PI

Consultancy Projects

  • Time and Motion Study, Set up Time Improvement and Ergonomic Study at Cadbury, Baddi, 2007-08, 2.75 Lakhs
  • Industrial Engineering Study on Manpower Redeployment for Productivity at Cadbury India Ltd., Malanpur, 2006-07, 2.25 Lakhs
  • ISO 9000 implementation at Milkfood Limited, Bahadurgarh, 2005-06, 0.75 Lakhs
  • Training on basic Manufacturing Processes at International Tractors, Hosiharpur, 2005-06, 0.75 Lakhs
  • ISO Implementation at RR Electronics, Chandigarh, 2004-05, 0.45 Lakhs
  • Six Sigma deployment at State Bank of Patiala, 2004-05, 2.25 Lakhs
  • Industrial Engineering Study of Executives for Productivity Improvement at Cadbury, Malanpur, 2003-04, 1.50 Lakhs
  • Time and Motion Study of Production Lines at Cadbury India Ltd. Malanpur, 2002-03, 1.15 Lakhs
  • Training of Manpower in the area of CAD/CAM at R&D Centre for Bicycle & Sewing Machine, Ludhiana, 2000-02, 2.25 Lakhs
  • ISO 9000 Implementation at SPL, Faridabad, 2000-02, 0.80 Lakhs
  • Short Term/Refresher Course Organized
  • Workshop on Six Sigma, Rayat Bahra Group, Punjab, November 8, 2008
  • Workshop on Curriculum Development of BE-MBA Programme, Thapar University, Patiala, October 8, 2006
  • Short Term Course on Six Sigma Deployment, Thapar University and IAPT, Ludhiana, May, 2006
  • Seminar on Non-traditional Machining, Thapar University, Patiala, March 17&18, 2006
  • Workshop on Lean Manufacturing and Waste Minimization , R&D Centre for Bicycle & Sewing Machine & Thapar University, Patiala, April, 2005
  • One Day Programme on Total Productive Maintenance, Thapar University, Patiala, December, 2003
  • Workshop on Quality Systems, Thapar University, Patiala, February, 2002
  • Short Term Programme on Resource Waste Identification and Reduction, AICTE Sponsored, Thapar University, December, 2000
  • Awareness Programme on ISO 9000, Thapar University, Patiala, August, 1999

Conferences/Workshops Organized

  • 15th Global Conference on Flexible Systems Management (GLOGIFT2015) flexibility for Manufacturing Excellence and Resource Management, October 23-25, 2015, Pune, India
  • Regional Conference on Radio Science, January 2-5, 2014, Pune, India
  • VII Annual International Conference of Technology Intensity & Global Competitiveness, November 30-December 2, 2012, Pune, India
  • Second TIET Foresight Symposium on Higher Technical Education- Issues of Access and Delivery, November 22-24, 2003, Patiala, India

Ph.D. Thesis Guided

S. No. Student’s Name Title Year
1 Amol Dalvi Optimization of Hole Making Operations Using Advanced Optimization Techniques 2017
2 Vijay Kumar Jatti Process Characterizations of Electric Discharge Machining of Monal Alloy, Shape Memory Alloy and Beryllium-Copper Alloy 2016
3 Nitin Khedkar Surface Improvement of Die Steel Materials by Power Mixed Electrical Discharge Machining (PMEDM) for Tribological Application 2016
4 Sanjiv Kumar Investigate the Effect of Cryo-Treatment on Machine Characteristics of Titanium Alloys with Electric Discharge Machining 2016
5 L.V. Kamble Heat Transfer Studies of Horizontal Single Tube Bundles Immersed in Gas-Solid Fluidized Bed of Large Particles using Artificial Neural Networks 2015
6 Balwinder Singh Development of a Model for Fostering Innovation Culture in Small Scale Auto-parts Manufacturing Industry of Punjab 2015
7 Nitin Singla Implementing TQM for Competitiveness: An Analysis using Flexible Systems Methodology 2015
8 Ravinder Pratap Ergonomic Investigations of Asymmetrical Manual Lifting Tasks on Indian Male Worker 2015
9 Abhijeet Auti Optimization Of Parabolic Concentrator and Absorber for Water Desalination System 2014
10 Gulshan Chauhan Lean Manufacturing Through Management of Labour and Machine Flexibility 2013
11 Tarun Nanda Analysis and Design of Strategic Technology Development Programme for Small Scale Manufacturing Industries 2011
12 Sanjiv Kumar To Investigate the Phenomenon of Surface Modification in Die Steels Using EDM Process and Develop Related Models 2008
13 Rajiv Garg Managing Socio-technical Change in Automobile Industry 2005
14 Ajay Batish Productivity Enhancement in Engine Bearing Manufacturing Industry Through Integrated Work System and Job Design: The Ergonomic Perspective 2004
15 J.S.Khamba Flexible Management of New Technology in Manufacturing Industry for Strategic Success 2002
16 A.B.Gupta Managing Flexibility for Productivity in Engineering 2000
17 Ravi Kiran Dynamics of Productivity in Manufacturing Industry 1999

Ph.D. Thesis on Hand

S. No. Student’s Name Title
1 Nitin Solke Lean Manufacturing Through Management of Manufacturing Flexibility in Auto Component Industry
2 Ravi Shekhar Machinability Enhancement of Advanced Metal Matrix Composites

M.E /M.Tech. Thesis Guidance: 45

Membership of Professional Bodies/Societies

  • Life Member Indian Society of Technical Education (ISTE)
  • Life Member, Global Institute of Flexibility Management (GIFT)

Achievement, Awards and Recognitions:

Organization Year Conferred
Cambridge 2004
Marquis Who is Who 2003 onwards
GLOGIFT 2000
Institute of Industrial Engineering 1997

Reviewer of Journals and Conferences

  • Global Journal of Flexibility Management
  • International Journal of Mathematics in Operational Research (IJMOR)
  • International Journal of Business Excellence (IJBEX)
  • International Journal of Logistics Systems and Management (IJLSM)
  • 3rd Intl. Conference on Transformations in Engineering Education, COEP Pune
  • Measuring Business Excellence

Message to Students & Community

For success in life determination and hard work in the right direction is needed. Never lose focus of what you want to achieve and then work systematically to realise your goal.